The plate heat exchanger has the following unique features in its design:
(1) Energy saving: the heat transfer coefficient is 3000~4500 kcal/m2? ℃? H, the shell heat exchanger has 3~5 times higher thermal efficiency.
(2) Compact and compact: Plate heat exchanger plates are precisely arranged. Compared with other types of heat exchangers, what are the characteristics of the plate titanium frame? The heat exchanger has less floor space, small space, and the same heat transfer area. The heat exchanger is only 1/5 of the shell-and-tube heat exchanger.
(3) Easy to clean and easy to disassemble: the plate heat exchanger is clamped by the clamping splint, and it is convenient to disassemble, open and clean at any time, and because the plate is smooth, the turbulence is deep, and the scale is easy.
(4) Without a row of liquid, the plate heat exchanger seal groove is equipped with a discharge channel, and various media will not collude. Even if it leaks, the media will always come out.
(5) Long service life: The plate heat exchanger is made of stainless steel or titanium plate, which can withstand various corrosive media, the gasket can be exchanged, and it can be easily disassembled and repaired.
(6) Strong adaptability: The plate heat exchanger plate is a self-supporting component, and the process can be increased or reduced according to the requirements, and the situation is diverse; it is suitable for various process requirements.
The basic structure of the titanium plate heat exchanger: the titanium plate heat exchanger is mainly composed of a frame and a titanium plate 2, mainly made of a variety of materials, and various different forms of production models are pressed into different shapes (15260, -775.00 , -4.83%) The gasket is used to seal the frame around the media flow plate and the corners through the fixed compression plate, the pressure plate, the upper and lower guide rods and the clamping bolts constitute the movable plate heat exchanger is a fixed pressure plate superimposed in the plate, the middle pressure plate, Then clamp with clamping bolts
The MSF unit with the largest production volume, with a focus on 36,000 tons per day. The installation of Italian titanium plate heat exchanger is an efficient, compact and tight heat transfer device. Since the 1980s, it has been developed as a continuous low temperature sterilizer. Since the 1920s, it has been applied to the construction and application of titanium plate heat exchangers in the food industry. There are some special features. Therefore, plate heat exchangers have been widely used in petroleum, chemical, light industry, electric power, smelting metals, machinery, Energy and other industrial fields, as a very competitive species in China’s heat exchanger family, plate heat exchangers began to be produced in the 1960s. So far, plate heat exchangers in many regions of China have been widely used in titanium and titanium alloys. With the recent rise of promising metal materials, transfer printing made of titanium alloy has good corrosion resistance, high heat transfer efficiency, smooth appearance without scales, small proportions, high strength, small equipment volume, small and unique quality, and a wide range Used in aviation, aerospace research, marine engineering, petroleum, chemical, metallurgy, electronics and other industries, ics, health care, food spectrometer and other fields.
